Hit enter to search or ESC to close
Your cart summary
Get Stuff Done, Enjoy Life’s Adventures with the Utemaster Centurion Canopy.
Suits 2024 Mitsubishi Triton.
Design Registration 426186
TO GET A QUOTE, CONFIGURE YOUR VEHICLE
(freight to be calculated at checkout)
Traditionally, Ute Canopies are constructed with fibreglass or ABS plastic. The Utemaster Centurion Canopy is constructed with Aluminium which gives it greater strength. It has a dynamic load rating of 200kg and a static load rating of 600kg when being used with the Cantilever Roof Rack.
Because it is so strong, we can maximise access through full-width doors without compromising on the structural integrity of the canopy.
Watch out the video for a full product breakdown.
Finding it hard to reach your tools and equipment through small canopy windows?
Wasting time and feel frustrated when trying to access your gear?
The Utemaster Centurion Canopy features full-width doors that give you access to your gear the whole way down each side. There is no obstruction along the top edge of your tub meaning you can easily reach over and pull your gear out through the side door opening.
We were recently asked: “What are they like keeping the rain out when open ???? the worst part of my canopy is all the water tracks straight inside with wings open…”
That's so frustrating! We can only imagine how many tradespeople and recreationists out their struggle with this over the winter periods. Not only does it damage your gear inside, but it also delays progress on a job site.
We thought we'd share a video of the Utemaster Aluminium Canopy being water-tested during the design/ development phase a few months back - as you can see the built-in rain channels send any water landing on the canopy away for the inside of your tub.
Losing your tools and equipment due to a break-in is not only lost money - this can also have an impact on the time and productivity of the job you are working on.
Concealed security latches mean each door is locked on both sides, making it hard to pry open.
On some products you will see the locking rods exposed, this can be problematic if your load shifts during transport because it can jam the locking mechanism.
To prevent this from happening, the Centurion Canopy™ has lock covers on the inside of the doors, these also provide the canopy with a tidy “finished” look.
As an optional extra, you can purchase a Central Locking accessory for the Centurion Canopy.
This allows you to lock the canopy using the factory vehicle key remote.
Please Note: Your Canopy can be locked manually using the supplied key. The Central Locking is an optional upgrade accessory.
1X LED light comes standard with the Central Locking accessory, which is mounted to the inside of the rear door on the canopy.
You have the option to upgrade this by adding another light to each side door.
This helps to fully illuminate the tub area and makes it easier to see your gear at night time.
Part #CANOPY-LED-INTERIOR (2X LEDs, one for each side door)
Please Note: This part is designed to connect to the system used for the single light which features in the rear door, it cannot be retrofitted to a canopy without this light.
Fibreglass or ABS canopies can easily crack under stress.
Despite being lightweight, if engineered correctly aluminium can achieve a very high strength-to-weight ratio and withstand a significant amount of weight and stress without breaking.
This means you can carry much heavier loads than you ever could on a fibreglass or ABS canopy, without going over your Gross Vehicle Mass rating.
Every Centurion Canopy is model specific and has been designed to match the contours and profile of the vehicle.
In addition to this, the Centurion Canopy doors are made up of one aluminium panel which have no external rivets.
This not only gives the canopy its stealth appearance but also helps boasts its strength.
It is a tough coating that is baked onto the Canopy during the painting process.
This finish is resistant to scratches, chips, fading, and corrosion, ensuring that your canopy will look great for years to come. It also matches the black accents of the vehicle.
You may be wondering if the canopy gets hot, it can on the surface but the inside stays cool enough to keep your beer fridge running cold!
The Utemaster Centurion canopy has an inbuilt support frame and no additional bracing is needed to make it load-bearing meaning the available load height is HUGE.
When you purchase a Centurion Canopy™ you are investing in quality gear.
The concealed extrusion hinge runs the full length of the door, matches the Canopy colour and eliminates fasteners piercing the body.
This significantly reduces water ingress and improves the longevity of the product.
All utes are designed to flex in between the tub and the cab. This can be problematic for roof racks that are mounted to both the cab and the canopy because it can cause damage while the flex occurs.
The Cantilever Roof Rack is an optional heavy-duty rack that extends over the cab of your Ute without requiring any direct mounting points to the cab.
The Cantilever Roof Rack has a dynamic load rating of 200kgs and a static load rating of 600kgs. The dynamic load rating refers to the amount of load you can safely carry at open road speeds, whereas static load rating refers to the amount of weight you can put on the rack when the Ute is parked (For example, a Roof Top Tent with people inside).
AU Design Registration 201917366
For those who like to bring their furry friends along for the ride, we offer the Dog Vent Kit.
This accessory provides ventilation and fresh air for your canine companion, ensuring their comfort and safety while on the road.
The Dog Vent Kit is easy to install and is fitted to both doors of the canopy for ultimate airflow. The doors can still be locked with the dog vent kit applied which means the gear on the inside is still safe and secure.
A traditional canopy shelving unit requires a frame mounted to the floor which gets in the way and takes up valuable load space.
The Removable Canopy Shelving Unit is attached using a T-Track system which is mounted to the ceiling using the same load-bearing mounts that support the Cantilever Rack.
It will help you keep your tub organised and tidy by providing a dedicated space to store your tools, small parts, and equipment inside your vehicle.
Paul from Laser Electrical Mudgee chose the Utemaster Centurion Canopy™ to help him get stuff done, enjoy life's adventures.
Watch the video to find out what makes the Centurion Canopy™ the ultimate dual-purpose Ute Accessory.
Should anything go wrong with the product you’ll be pleased to know our friendly team will be available to help you get your gear sorted.
All of our products are backed by a 3-year warranty which covers material, manufacturing defects and malfunctions.
Utemaster products are designed and manufactured in our state-of-the-art facility in New Zealand.
Everything from Design to comprehensive product testing is completed on-site. This ensures that every product is built to the highest standard and will be able to stand the test against the toughest elements.
We also have a warehouse in Sydney, where common models will usually be dispatched within three working days.
Utemaster sometimes gets asked why does the Centurion Canopy cost more than some other products on the market.
The price tag is a true reflection of the quality of the product and engineering. Unlike other products, the Centurion Canopy isn't a flat-pack or generic design. It is model-specific and pre-assembled to a high standard.
You are paying for an engineered product that does exactly what it says it will.
Our online Ute Builder allows you to spec up your model of ute with your dream setup.
This will also produce a quote on the spot for your built setup.
Head to the link below to get started:
The Utemaster Centurion Canopy is easy to install because it attaches to the ute using factory mounting points in the tub.
This means it requires no drilling so if you decide to remove the canopy e.g. for selling, there's no need to worry about damaging your vehicle.
We provide fitting instructions and videos with every product, so you can easily install the canopy yourself. Additionally, the central locking system is designed to be wired up without the need for an electrician, making it even easier to set up.
With a Cantilever Roof Rack fitted you can carry 200kg dynamic load rating and 600kg static rating. The Cantilever Roof Tray evenly distributes weight across the canopy for maximum strength.
The Utemaster Centurion Canopy weighs 60kgs, Cantilever Roof Rack 17kgs, Roller to suit Cantilever Rack 3kgs
Our Ford Ranger Canopy is a premium product and is typically priced higher than a fibreglass canopy. You can use our Dream Ute Builder to build your quote and order it directly off our website.
The Utemaster Centurion Canopy is fitted to the tub using factory mounting points, this means there is no drilling required. Without Central Locking the Canopy generally takes 30-60 minutes. Central Locking adds another 30-60 minutes to this.
The Utemaster Centurion Canopy is constructed from aluminium which gives it a superior load rating, better access and security.
Yes you can, we don't supply these but if you talk to your local roof rack centre they will be able to fit a T-Track with crossbars to the roof of your canopy. However, standard Roof Racks have lower load ratings than the Utemaster Cantilever Roof Rack, it is important that you check the rating of the crossbars before loading.
Just like the inside of the vehicle, it will get warm inside the Canopy if it's parked in the sun. However, you can install a Dog Vent Kit which helps the air to flow into the Canopy area. It's lockable so your gear will be safe and secure.
It's very common for our customers to put fridges inside. One customer said "I went camping on Fraser in summer for 7 days straight mate and my fridge was faultless. Not a warm beer in sight
The Centurion Canopy is fully sealed to stop water and dust from getting into your gear.
Utes have small gaps in the tailgate where dust can enter the tub. However, you can add a tailgate Seal Kit to prevent dust from coming in either side of the tailgate.
This will ensure that the gear in your tub stays dust-free.
The Utemaster Centurion Canopy is compatible with a huge range of accessories, check out some of the options here.
Absolutely! Check out our Dog Vent Kit which is designed to increase airflow into the canopy.
No issues at all, windows in a ute canopy are not a WOF requirement
The Utemaster Centurion Canopy is compatible with a huge range of accessories so you can spec it to your lifestyle.
Click the link below to check them out: